KM Studio AmsterdamKM Studio

3D MODELING

3D modeling service: CAD models that print and fit

We make 3D models from scratch, from a sketch, a drawing or a description, or fix an existing model so it prints and goes together. Billed hourly, agreed with you before any work starts.

3D modeling at a glance

Software
Onshape, Fusion 360, SolidWorks, Blender
Start from
Sketch, drawing, photo, part or file
You get
CAD model and STL or OBJ
Price
Hourly, agreed before we start

Which kind of help do you need?

BEST FOR

A part that does not exist yet

Brackets, housings, holders, adapters and covers: a part with a clear job, modeled to be printed and to fit what it attaches to.

ALSO

A model that does not print well

Walls too thin, parts that do not fit, a file that is not ready to print. We fix the model for printing and assembly.

ALTERNATIVE

Copying an existing part

If the part already exists, we measure or scan it and rebuild it in CAD.

Reverse engineering

What we model

  • New parts from a sketch, a drawing, a photo with dimensions, or a description.
  • Housings and enclosures with lids, screw bosses and openings for cables and connectors.
  • Brackets, adapters and holders that fit an existing device, profile or surface.
  • Existing models fixed for printing and assembly: wall thickness, tolerances, fits.
  • Free-form and decorative shapes in Blender.

Modeled to be printed

We run the printers ourselves, so we model with the process in mind: wall thickness, tolerances, how parts fit together and how they sit on the build plate. On FDM fits we plan about 0.2 to 0.3 mm clearance per side. Threaded inserts and screw bosses go in where a screw is used many times. More in the design guide.

Software: Onshape, Fusion 360, SolidWorks and Blender

Technical parts are modeled parametrically in Onshape, Fusion 360 or SolidWorks, so dimensions can still change later. Organic and decorative shapes go in Blender.

What you get: CAD model and STL or OBJ

You get an STL or OBJ file, ready to print, and the CAD model exported for your own CAD program. Tell us which program you use.

How it works

Tell us what the part has to do, what it attaches to and the dimensions that matter. Photos, sketches and existing files help. We agree the hours with you before we start. When the model is ready, we can print it with FDM, SLA or SLS, and adjust it after a first test print if needed.

Price

3D modeling is billed hourly, agreed with you before any work starts, and shown as its own line on the quote. It can be rushed on request, with the extra fee agreed before we start. Printing is priced by weight, see the pricing page.

Modeled to go together

Render of a printed housing with lid, screws and a cable

A housing with lid, screws and cable worked out in the model

Render of a brass heat-set insert in a printed flange

Bosses for brass inserts where screws go in and out

Render of a printed connector joining aluminium extrusions

A connector modeled around a standard profile

Frequently asked questions

Yes. A sketch, a technical drawing, photos with dimensions or a description all work. The more you tell us about what the part has to do and what it attaches to, the better.

Onshape, Fusion 360 and SolidWorks for technical parts, Blender for organic and decorative shapes.

An STL or OBJ file, ready to print, and the CAD model exported for your own CAD program. Tell us which program you use.

Yes. We check wall thickness, tolerances and how parts fit together, and change the model where needed.

It is billed hourly, agreed with you before any work starts, and shown as its own line on the quote. Printing is priced by weight.

Yes. We offer FDM, SLA and SLS printing. Upload the file for an instant price.

Need a 3D model?

Tell us what the part has to do and we agree the hours with you before we start. Already have a file? Upload it for an instant price.